– Automatic batch Weighers
Extensively used by reputable grain cleaning operators.
Kongskilde batch weighers are used to record weight of material
entering and leaving storage. Smaller models are used for mixing
and feeding installations. They can be used for the weighing of
cereals and other granular materials up to a particle size of 15
mm (5/8 in). Twin Compartment Weighers are ideal for use on mobile
seed cleaning Plants.
- Modular Design – Enables incorporation
into conveying systems.
- Reliability – Robust but simple construction.
- Range of Materials – Used for weighing
cereals and other granular material with particles up to 15mm.
- Mechanical Counter – Reliable 7 digit
- KA10 – 8 Tonne / Hour
- KA25 – 15 Tonne / Hour
- KA50 – 25 Tonne / Hour
Kongskilde Twin Compartment Weighers are suitable for mixing and
feeding installations. They are extensively used by mobile seed
cleaning operators throughout Australia, being suited to pickled
grain. They are also used in Pellet Batching Plants.
The KA10 can be fitted with an inlet control shutter.
Single compartment Weighers
- B50 – 27 Tonne / Hour
- B100 – 40 Tonne / Hour
The single compartment weighers combine greater accuracy (+/-0.5%)
with high capacity. A facility incorporated in the machine simplifies
check weighing and calibration. The weighers can be linked to system
controlling batch weighing.
The batch weighers operate on a continuous batch weighing principle,
in which the material flows constantly through the weigher at a
Weighing is based on establishing a balance between the batch of
the material and the weigher's fixed weight. This ensures optimum
accuracy, irrespective of the material being weighed.
Note: All weighers should be checked for accuracy on a regular
basis. Weighers not suitable for fine meal or similar materials
which bridge easily.
The weigher should have, at least, a capacity equal to other equipment
involved in the installation.
|Batch size, kg per comp., standard
|Batch size, kg per comp., min/max
|Capacity t/h (dry barley)
|Volume per compartment, litres
|Net weight, kg
|Accuracy deviation (subject to correct adjustment
All weighers are balanced at the factory to weigh out the batch
indicated. If desired, the weight may be varied within the limits
- Electronic Counters – Battery & Electric
- Dust covers
- Inlet and Outlet Hoppers
- OK piping system transitions
- Height adjustable legs
- Flow control baffles (standard on single compartment
- Mechanical programmable batch counters (KA10
& KA25 only)