Suction blowers

The Kongskilde suction blowers offer the most versatile conveying system on the market for all free flowing types of grain and seed irrespective of volume.

The perfect solution for all conveying jobs on the farm.

Applications

The Kongskilde pneumatic conveying systems are suitable for a variety of applications. It sucks the grain heaps or pits and blows it directly into the silo, truck, or on-floor storage.

The high performance blower, combined with the simple and flexible OK pipe system, will fit anywhere, irrespective of building facilities.

Features

• Efficient – Removes all the grain from your storage area, less time required for floor clean up.
• Flexibility – The OK pipe system carries the air flow in any desired direction, and the quick-release couplings allow easy installation of both temporary and permanent pipelines.
• Ease of Use – place the suction head into the grain, the suction blower will do the rest.
• Simple Adjustment – during operation to maximize efficiency.
• Low Maintenance – Daily servicing is kept to an absolute minimum.
• Choice of Drives – Electric and PTO drive models.
• Choice of Suction Heads – 5 special suction heads are available to suit any specific conveying job. (Cleaning, Long, Round, Short, and Universal).

Operation

On the blower suction side an air / grain mixture is conveyed to the suction cyclone where the gain is separated from the air. The air is drawn into the blower, whereas the grain drops into the rotary valve located immediately below the suction cyclone. The rotary valve delivers grain into the pipeline on the pressure side of the system. The grain is carried to the outlet cyclone where it is decelerated before falling through the outlet. The conveying air is discharged through the top of the cyclone.

Models

3 versions of the suction blower are produced, offering a total of 11 models, to meet any requirement for indoor and outdoor pneumatic crop conveying.

• Suc-E Electric powered. Suitable for permanent installations. 5 models up to 33 tonnes / hour.*
• Suc-T Tractor (PTO) powered. Linkage mounted. 2 models up to 33 tonnes / hour.*
• Suc-TR Trailer mounted PTO drive. 4 models up to 64 tonne / hour.*

Conveying capacities – up to 64t/h*

*Note: In pneumatic conveying the capacity depends on the type of material to be conveyed, the piping layout, and the length.

Conveying capacities in wheat (t/h) Suction pipeline One vertical universal suction head One 90° bend 2m horizontal piping Pressure pipeline A number of metres of horizontal piping 4m vertical piping Two 90° bends One outlet cyclone Conveying distance (m) 10 20 30 40 50 60 80 100 120 150 200 SUC100 7,1 6,2 5,4 4,7 4,1 3,6 2,7 2,0 1,5 0,8 SUC150 12,1 10,7 9,6 8,6 7,8 7,0 5,8 4,8 4,0 3,0 SUC200 15,7 13,9 12,5 11,2 10,1 9,1 7,5 6,2 5,2 3,9 SUC300 20,4 18,2 16,4 14,9 13,6 12,5 10,6 9,1 7,9 6,4 4,7 SUC500 33,2 30,1 27,4 25,1 23,1 21,4 18,6 16,3 14,4 12,2 9,5 SUC700 44,2 40,3 36,9 34,0 31,5 29,3 25,6 22,7 20,3 17,4 13,9 SUC1000* 64,0 58,4 53,5 49,3 45,7 42,5 37,1 32,9 29,4 25,2 20,2 *) Special round suction head. The capacity is only valid for short suction way. The examples given are only intended as a guide as other factors may affect capacity.

Note: In the examples the conveying capacities apply to wheat with a specific gravity of 750 kg/m3, a moisture content of 15%, and a content of 1 % impurities.

The capacities refer to different piping layouts and to different conveying distances. The conveying distance is the total length of all horizontal and vertical piping on the suction and the pressure side. The length of the suction hose is included, but bends and suction head are not taken into account.

If a long suction head is used, the conveying distance must be increased by 1.5 m. For each extension there will be a further increase of 0.65 m.

Download Brochure

Home Company Profile Kongskilde Combi-Cleaner Pre Cleaners Grain Drying Weighers Suction Blowers OK Pipe System High Pressure Blowers Heaters Sund Convey-All Specials Contact Us Sitemap